Placing the Battery Pack into the Charger 9
E-EQ-MX3CHGROG-F-ARC MX3 Multi-Charger User’s Guide
Normal Operations
The optimal operating temperature range for the Multi-Charger is between 50°F and 95°F (10°C
and 35°C). While charging, the charger and battery pack will generate enough heat to feel warm.
This is normal and does not indicate a problem. Do not store the battery pack in direct sunlight or
anywhere the battery pack cannot cool down. If the battery pack is hot after removal from the
computer, allow it to cool at room temperature before placing it in the charger.
Charge times may increase significantly if the battery is warm or hot, since it takes the battery
pack longer to cool down while in the charger pocket. If the battery pack is hot from severe
environmental use and immediate recharging is necessary, place the battery pack in a cool air
stream or in a cool location until it is no longer warm to the touch before charging.
Maintenance
Use a clean soft cloth to wipe any dirt, moisture or grease from the battery pack, contacts or the
charger. Do not use any liquid to clean the battery pack or charger contacts.
Storage
Battery packs should be kept in a cool, dry place whenever possible. Do not store battery packs in
direct sunlight, on a metal surface, or anywhere the battery pack cannot cool down. Do not leave
the battery pack in a non-operating charger. The battery pack may discharge through the charger
rather than hold its charge.
Service
There are no user serviceable parts in the LXE 156213-0001 and 158224-0001 Rechargeable
Lithium Ion Battery Packs or the Multi-Charger. Should your charger require service, contact
LXE. Refer to section titled “Getting Help.”
