English - 25
7.8 I would like to turn on/off the lamp
The default of the lamp is OFF. When using the remote control or control
panel:
1. Press [MENU] to enter the setting menu.
2. Press [] or [] to select [Display].
3. Press [] to the [Lamp].
4. Press [] or [] to select [Off/Arm lamp/Both Lamps/Head lamp].
5. Press [MENU] to exit.
7.9 I would like to freeze images
1. Press [FREEZE] on the remote control to freeze the current image on
the screen. Press again to defreeze.
7.10 I would like to capture images
7.10.1 Capturing and saving images
1. Press [CAPTURE] on the remote control or control panel to
capture and save images.
You cannot capture images when the capture mode is set to
[Disable]. If it is set to [Continuous], you can capture images
continuously. Press [Capture] to start capturing continuously,
or press [Capture] again to exit.
To change the quality of captured images, please refer to 7.10.2
Setting the quality of captured images.
To change the settings of captured images, please refer to 7.10.3
Setting continuous capture.
7.10.2 Setting the quality of captured images
1. Press [Menu] on the remote control or control panel to enter the
setting menu.
2. Press [] or [] to the [Storage] menu.
3. Press [] to find [Image Quality].
4. Press [] or [] to select among [High/Medium/Low].
5. Press [Menu] to exit.
