A SERVICE OF

logo

OPERATION
Front Panel Controls
8 OMH-6722B
CHAPTER 2
Analog Output
Analog output representing the power measurement is located in the upper left
corner of the 6810B rear panel. The
POWER ANALOG OUT is a non-calibrated
value between 0 and 10 volts representing the measured power as a percent of
full scale power within the selected gain range. For example, if the full scale power
for gain range three is 10
µW and the displayed power is 5.000 µW, then 5.0 volts
is present on the
POWER ANALOG OUT connector.
Figure 2.3 Power Analog Out