21
ENG
English
CUSTOMIZING SETTINGS
Menu Analog
(D-SUB)
PCoIP
Description
HORIZONTAL
● x
Moves the display area left or right.
VERTICAL
● x
Moves the display area up or down.
CLOCK
● x
If vertical lines are shown on the screen, adjust the frequency to mini-
mize the lines and adjust the screen's horizontal width.
PHASE
● x
Adjusts the focus of the screen's image.
Use when frequencies are shown on the screen or when the text ap-
pears overlapped. For optimal results, use this option after adjusting
the "CLOCK" option.
y
Analog: D-SUB (analog signal) input. PCoIP: Internal signal through the LAN.
Display
1
Press any button on the front of the monitor to dis-
play the MONITOR SETUP OSD menu.
2
Press the MENU button to display the options in the
OSD menu.
3
Set the options by pressing the buttons on the front
of the monitor.
4
Select EXIT to leave the OSD menu.
To return to the upper menu or set other menu items,
use the up arrow (
) button.
Each option is explained below.
Volume (Only supported in PCoIP)
1
Press any button on the front of the monitor to dis-
play the MONITOR SETUP OSD menu.
2
Press the MENU button to display the options in the
OSD menu.
3
Set the options by pressing the buttons on the front
of the monitor.
4
Select EXIT to leave the OSD menu.
To return to the upper menu or set other menu items,
use the up arrow (
) button.
