33
ENGENGLISH
WATCHINGTV
NOTE
If you set Satellite to Others when adding a
setting ID, you must add a transponder using
ManualTuning.
You can add up to 16 setting IDs.
All setting IDs can be deleted, except for
SettingID1.
When selecting
22KHzTone and DiSEqc, or
ToneBurst and DiSEqc, you must connect
them in the same position as displayed on
the OSD.
If you delete a setting ID, all programmes
stored in the setting ID are deleted.
1 Press Home to access the Home menu.
2 Press the Navigation buttons to scroll to
SETUP and press OK.
3 Press the Navigation buttons to scroll to
SETUP and press OK.
4 Press the Navigation buttons to scroll to Tivu
ProgrammeListUpdate and press OK.
5 Press the Navigation buttons to scroll to Off or
On.
TivuProgrammeListUpdate
(In Satellite, Antenna & Satellite, Cable & Satellite
mode only-Only Satellite models)(Only Italy)
NOTE
It updates the changed Programme List in-
formation by based on country broadcasting
circumstance and satellite.
It updates the Programme List when the TV
turn off all the time. After updates, the Pro-
gramme List may be changed. If not want,
select Off.
6 If you select MotorizedSystem to On, select
your desired source.
7 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
Option Description
Drive
Direction
Select the direction in which you want to
move the motor.
DriveMode Two modes are available: Step and Con-
tinuous.
Step: The motor moves based on the
value you enter (from 1 to 128).
Continuous: The motor moves con-
tinuously until you press the "Stop".
TestTP Select the test TP you want to tune.
SetLimit Set the motor movement to east or west
to have the motor move only within the
direction set.
On: You can limit the movement to
the current direction by selecting the
"West/East".
Off: You can cancel the limit you set.
GoToZero You can move the motor to "Zero".
Store You can save the motor's current direction.
Downloaded From TV-Manual.com Manuals
