ThinkServer RAID 710 Adapter (also known as 9270CV-8i RAID adapter)
The following illustration shows the connectors on the ThinkServer RAID 710 Adapter.
Figure20. ThinkServer RAID 710 Adapter
1 Port 1
3 ThinkServer RAID Super Capacitor Module connector
2 Port 2
1 Port 1
Used to connect a mini-SAS signal cable. See “Mini-SAS to mini-SAS signal cable connections” on page 37.
2 Port 2
Used to connect a mini-SAS signal cable. See “Mini-SAS to mini-SAS signal cable connections” on page 37
.
3 ThinkServer RAID Super Capacitor Module connector
Used to connect the cable of a ThinkServer RAID Super Capacitor Module. See “Replacing the ThinkServer
RAID Super Capacitor Module” on page 129.
Hot-swap hard-disk-drive backplane
Your server comes with one of the following hot-swap hard-disk-drive bay and backplane congurations:
• Up to four 3.5-inch hot-swap SATA or SAS hard disk drives with one backplane
• Up to eight 2.5-inch hot-swap SAS hard disk drives or SATA solid-state drives with one backplane
Chapter 3. Product overview 33
