Configuring and Controlling the VP-725xl
YPbPr
YC
CV
HDMI
VGA
Capture
USB
Enter
OSD Picture
Menu
Auto-Image
PIP
PIP Size
SWAP
VOL
VOL
+
Figure 21: Infrared Remote
Control Transmitter
Table 17: Infrared Remote Control Transmitter
Functions
Freeze Pauses the output video
Power Cycles power
Blank
Toggles between a blank screen (blue or black
screen) and the display
Mute N/A
MIX N/A
Talk Over N/A
Over Ride N/A
Audio Level N/A
Video Group Select the Video group operation mode
Audio Group N/A
Scaler Select the Scaler operation mode
Master
Audio
N/A
PIP
Toggles the picture-in-picture function and
illuminates/turns off the PIP button
PIP Size Toggles the PIP size
SWAP
Toggles between the PIP content and the parent
screen content
PIP Source Selects the PIP source
Auto Image
Assesses the image and improves the quality
accordingly, by automatically adjusting the phase,
frequency and position
OSD Activates/deactivates access to the OSD Menu
Picture Open the Picture menu
Menu Opens the Main menu
2
Navigation
arrows
Allows maneuvering within an OSD screen (left,
right, up and down, as well as the Enter arrow at
the center)
USB select the USB
source
Capture
Capture an image to place as a logo or
background
VGA selects the VGA (UXGA) source (from 1 to 4)
HDMI selects the HDMI source (from 1 to 4)
CV selects the CV source (from 1 to 4)
YC selects the YC source (from 1 to 4)
YPbPr selects the YPbPr (COMP) source (from 1 to 4)
1 Press the PIP Source key and then an input key
2 Opens the menu on the LCD display and if the OSD button illuminates, will open the relevant OSD
3 JPEG files on a USB memory stick
