All accessories and options may not be available in all markets.
Contact an authorized Kenwood dealer for details and complete
list of all accessories and options.
Options Specifications
M
odel TK-7102H TK-8102H
GENERAL
Frequency Range
Type 1 146-174 MHz 450-490 MHz
T
ype 2 136-162 MHz 485-512 MHz
Type 3 - 400-430 MHz
N
umber of Channels 8 (4 Channels x 2 Groups)
C
hannel Spacing
Wide 25 kHz
N
arrow 12.5 kHz
Channel Step 2.5 kHz / 5 kHz 5 kHz / 6.25 kHz
6
.25 kHz / 7.5 kHz
O
perating Voltage 13.6V DC±15%
Current Drain
S
tandby 0.4 A
Receive 1.0 A
Transmit (High Power) 14.0 A
O
perating Temperature Range -30°C ~ +60°C
Frequency Stability ±2.5ppm
(
-30°C ~ +60°C)
Antenna Impedance 50 Ω
Channel Frequency Spread
Type 1 28 MHz 40 MHz
T
ype 2 26 MHz 27 MHz
Type 3 - 30 MHz
Dimensions (W x H x D)
6
.29” x 1.69” x 5.39”
(160 mm x 43 mm x 137 mm)
w
eight (net)
(body only, approx.) 2.6 lbs (1.18 kg)
F
CC ID
Type 1 ALH32933210 ALH32943210
Type 2 ALH32933220 ALH32943220
Type 3 - ALH32943230
R
ECEIVER (Measurements made per TIA/EIA-603)
Sensitivity (12dB SINAD)
Wide
0
.28 µV
N
arrow
0.35 µV
Selectivity
Wide
75 dB
Narrow 60 dB
Intermodulation Distortion
Wide
70 dB
Narrow 60 dB
Spurious Response 75 dB
Audio Output (4W at 4 Ω) with less than 5% distortion)
TRANSMITTER (Measurements made per TIA/EIA-603)
RF Output Power
50 W 45 W
Spurious Response 70 dB
(High Power)
Modulation
Wide
16KØF3E
Narrow 11KØF3E
FM Hum & Noise
Wide 45 dB
Narrow 40 dB
Audio Distortion Less than 3%
Microphone Impedance 600 Ω
■ KMC-30
M
icrophone
(supplied microphone
■
KMC-32
1
6-Key Keypad
Microphone
■ KES-3
E
xternal Speaker
■ KLF-2
Line Noise Filter
■ KPS-15
DC Power Supply
■ KMB-10
Key Lock Adapter
Applicable MIL-STD
Standard MIL 810C MIL 810D MIL 810E MIL 810F
Methods/Procedures Methods/Procedures Methods/Procedures Methods/Procedures
Low Pressure 500.1/Procedure I 500.2/Procedure I, II 500.3/Procedure I, II 500.4/Procedure I, II
High Temperature 501.1/Procedure I, II 501.2/Procedure I, II 501.3/Procedure I, II 501.4/Procedure I, II
Low Temperature 502.1/Procedure I 502.2/Procedure I, II 502.3/Procedure I, II 502.4/Procedure I, II
Temperature Shock 503.1/Procedure I 503.2/Procedure I 503.3/Procedure I 503.4/Procedure I, II
Solar Radiation 505.1/Procedure I 505.2/Procedure I 505.3/Procedure I 505.4/Procedure I
Humidity 507.1/Procedure II 507.2/Procedure II, III 507.3/Procedure II, III 507.4
Salt Fog 509.1/Procedure I 509.2/Procedure I 509.3/Procedure I 509.4
Dust 510.1/Procedure I 510.2/Procedure I 510.3/Procedure I 510.4/Procedure I, III
Vibration 514.2/Procedure VIII, X 514.3/Procedure I 514.4/Procedure I 514.5/Procedure I
Shock 516.2/Procedure I, II, III, V 516.3/Procedure I, IV, V 516.4/Procedure I, IV, V 516.5/Procedure I, IV, V
ADS#07709 Printed in USA
footnotes from front:
1
DTMF includes PTT ID, Emergency ANI, Manual Encode
(KMC-32), Auto-Dial (9 numbers) & Stun.
2
Special Alert Tone Patterns operate for DTMF, selective call decode.
3
KCT-39 required for 4 CH remote control, ignition sense (KCT-18),
KGP-2A/B, KDS-100, data modems, external GPS interface.
4
KCT-39 & KCT-18 ignition sense cable options required.
5
KCT-39 required: Horn Alert operates for DTMF selective
call decode.
6
KPG-70D program software required: Windows
®
2000Me/XP.
Kenwood reserves the right to change specifications and features without prior notice.
Windows is a registered trademark of Microsoft Corporation in the US and other countries.
FleetSync
®
is a registered trademark of Kenwood Corporation.
