Multi food grinder AT281 (if supplied)
Use the multi food grinder to process raw and cooked meat; fish and nuts.
safety
●
Always ensure bones and rind etc are removed from the meat before
m
incing.
●
W
hen mincing nuts only feed a few down at a time and allow the scroll to
pick them up before adding any more.
●
A
lways use the pusher supplied. Never put your fingers or utensils in the
f
eed tube.
●
Warning - the cutting blade is sharp, handle with care both in use and when
c
leaning.
●
E
nsure the attachment is secured in position before switching on.
key ት
ቢ
ring nut
ባ multi food grinder screens: medium, coarse (due to model variants only 1
s
creen may be supplied)
ቤ
cutter
ብ scroll
ቦ
multi food grinder body
ቧ
tray
ቨ pusher
to assemble
1
Fit the scroll inside the multi food grinder body.
2 Fit the cutter – cutting side outermost ᕡ. Ensure it’s seated properly –
otherwise you could damage your multi food grinder.
3 Fit a multi food grinder screen ᕢ. Put the notch over the pin.
4 Loosely fit the ring nut.
to use the multi food grinder
1 Raise the mixer head.
2 With the multi food grinder in the position shown ᕣ, align the drive tabs on
the end of the scroll with the corresponding slots in the drive outlet.
3 Push the multi food grinder into the outlet and turn clockwise until it locks
into place.
4 Tighten the ring nut manually.
5 Fit the tray ᕤ.
6 Thaw frozen food thoroughly before mincing. Cut meat into 2.5cm
(1”) -wide strips.
7 Switch to maximum speed by turning the speed switch in a clockwise
direction. Using the pusher, gently push the food through, one piece at a
time. Don’t push hard – you could damage your multi food grinder.
important
●
Never operate the multi food grinder attachment for longer than 10 minutes
as this could damage your mixer.
●
The multi food grinder attachment will not operate unless the
medium and high speed outlet covers are fitted.
8 Once all the food has been minced, switch off and unplug.
9 Remove the multi food grinder.
care and cleaning
●
Always switch off and unplug before removing the attachment from the
kitchen machine.
●
Dismantle the attachment fully before cleaning.
●
Wash all the parts in hot soapy water, then dry thoroughly. Don’t wash
any part in the dishwasher. Never use a soda solution.
●
Wipe the screens with vegetable oil, then wrap in greaseproof paper to
prevent discolouring/rusting.
service and customer care
●
If the cord is damaged it must, for safety reasons, be replaced by
K
ENWOOD or an authorised KENWOOD repairer.
U
K
I
f you need help with:
●
using your appliance
●
s
ervicing or repairs
ట c
all Kenwood Customer Care on 023 9239 2333. Have your model
number ready - it is located on the underside of your appliance.
●
s
pares and attachments
ట
call 0844 557 3653.
other countries
●
C
ontact the shop where you bought your appliance.
●
Designed and engineered by Kenwood in the UK.
●
M
ade in China.
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE
P
RODUCT IN ACCORDANCE WITH EC DIRECTIVE 2002/96/EC.
A
t the end of its working life, the product must not be disposed of as urban
w
aste.
It must be taken to a special local authority differentiated waste collection centre or
to a dealer providing this service.
Disposing of a household appliance separately avoids possible negative
consequences for the environment and health deriving from inappropriate
disposal and enables the constituent materials to be recovered to obtain
significant savings in energy and resources. As a reminder of the need to
dispose of household appliances separately, the product is marked with a
crossed-out wheeled dustbin.
guarantee UK only
●
If your machine goes wrong within one year from the date you bought it, we
will repair or replace it free of charge provided:
●
you have not misused, neglected or damaged it;
●
it has not been modified;
●
it is not second-hand;
●
it has not been used commercially;
●
you have not fitted a plug incorrectly; and
●
you supply your receipt to show when you bought it.
This guarantee does not affect your statutory rights.
9
