26
BUSY CHANNEL LOCKOUT
This function is used in order to prevent transmitting on a
channel that somebody else is currently using. When turned
ON, a beep sounds when you press the PTT switch while
another party is using the channel, and you cannot transmit.
1 Turn the transceiver power OFF.
2 Press and hold the MENU key while turning the
transceiver power ON (for 1 second).
3 Press the ▲ or ▼ key to select “bL”.
4 Press the MENU key to select “bL-On” (busy channel
lockout on) or “bL-OF” (busy channel lockout off).
5 Press the PTT, MON, or CAL key to exit Menu Mode.
TRANSCEIVER BEEP
On various occasions (such as when you turn the transceiver
power ON), a beep will emit from the transceiver. If desired,
you can turn this feature off:
1 Turn the transceiver power OFF.
2 Press and hold the MENU key while turning the
transceiver power ON (for 1 second).
3 Press the ▲ or ▼ key to select “bP”.
4 Press the MENU key to select “bP-On” (beep on) or
“bP-OF” (beep off).
5 Press the PTT, MON, or CAL key to exit Menu Mode.
