Selecting the Program Type display language.
1 Enter PTY mode
Refer to <PTY (Program Type)> (page 11).
2 Enter Changing Language mode
Press the [CLK] button.
3 Select the language
Press the [1] — [3] button.
Button Language
[1] English
[2] French
[3] German
4 Exit Changing Language mode
Press the [CLK] button.
Changing Language for PTY Function
Putting the Program Type in the Preset button memory and
calling it up quickly.
Presetting the Program Type
1 Select the Program Type to preset
Refer to <PTY (Program Type)> (page 11).
2 Preset the Program Type
Press the [1] — [6] button for at least 2 seconds.
Calling up the preset Program Type
1 Enter PTY mode
Refer to <PTY (Program Type)> (page 11).
2 Call up the Program Type
Press the [1] — [6] button.
Program Type preset
RDS features
— 12 —
English
Setting the volume during Traffic Information.
1 Receive the station.
2 Set the volume you want.
3 Preset the volume
Press the [VOL ADJ] button for at least 2 seconds.
The volume level display blinks 1 time.
Presetting Volume for Traffic Information
Switching to traffic information automatically when a traffic
bulletin starts even when you aren't listening to the radio.
Press the [TI] button.
Each time the button is pressed the Traffic Information function
turns ON or OFF.
When it's ON, "TI" indicator is ON.
When a traffic information station isn't being received the "TI"
indicator blinks.
When a traffic bulletin starts, "TRAFFIC" is displayed it and it
switches to traffic information.
During reception of a AM station when the Traffic Information
function is turned ON, it switches to a FM station.
Receiving other traffic information stations
Press the [4] or [¢] button.
Traffic information station switching can be done when listening to
the radio.
Traffic Information
KDC-3026R_U.S 2003.09.30 04:08 PM Page 12
