Operating Instructions NT 361 Eco M A / NT 611 Eco M A English
20
Wet-vacuuming
Fitting rubber lips
! Fit the rubber lip seals
Note:
The profiled surface of the rubber
squeegees must be on the
outside.
! Remove the paper filter bag
! Insert power plug
! Switch on the machine and
start using it
! Drain dirty water using the
drain hose
(Applies only to
NT 611 Eco M A)
Warning!
— During vacuuming it is not
permitted to ever remove the
flat pleated filter.
— The paper filter bag and the
membrane filter (optional
accessories) respectively must
always be removed for
vacuuming wet dirt.
— When dielectric liquids are
vacuumed (for example. drilling
emulsions, oils and grease),
the device is not switched off
when the container is full. The
fill level must be regularly
checked and the container
emptied before it is too full.
Switch Power Filter Clean off
Setting of the slide (1) - upwards.
Note:
— It is advisable to switch off the -
Power Filter Clean – function
when vacuuming wet dirt with
the upholstery or the crevice
nozzles or mainly water out of a
container.
— The appliance turns itself
automatically off when the max.
liquid level has been reached.
— Switch the appliance off and
empty the container.
— Clean and dry the flat pleat
filter and the electrodes as well
as the container after finishing
wet vacuuming jobs.
