Back Exit
Mode
Mono
SSM
Local / DX
Blend Hold
Start
Local DX
Analog Digital Auto
C
H
ANN
E
L
Exit
Back Exit
Mode
Mono
SSM
Local / DX
Blend Hold
Start
Local DX
Analog Digital Auto
C
H
ANN
E
L
Exit
EXTERNAL DEVICES
ENGLISH
47
Changing HD Radio reception
mode
While receiving an HD Radio broadcast, the unit tunes
to digital or analog audio automatically due to the
receiving condition.
1
• You can also use MENU on the monitor panel.
2
3
Analog Tuning to analog audio only
Digital Tuning to digital audio only
Auto Switch between digital and
analog audio automatically
• If no sound can be heard from the selected setting,
change the setting to <Analog> or <Digital>.
• The setting automatically changes to <Auto> if you
tuned in to or change to another station, or if you
turned off the power.
• This setting cannot take effect for the conventional
FM/AM stations.
• If the radio station forces the reception mode to
digital, the DIGITAL indicator flashes.
Tuning in to stations with
sufficient signal strength
This function works only for FM bands. Once you have
activated this function (selected <Local>), it always
works when searching for FM stations.
1
• You can also use MENU on the monitor panel.
2
3
Only stations with sufficient signal strength will be
detected.
• The DX indicator goes off, then the LO indicator
lights up.
EN_KW-AVX810[J]f.indb 47EN_KW-AVX810[J]f.indb 47 08.1.25 7:50:43 PM08.1.25 7:50:43 PM
