12
6. Connect vent system to blower motor outlet (option 1 shown)
with 4 - #8 x ¾" hex head screws provided.
7. Go to the “Electrical Connection” section.
Left or Right Side Venting
1. Mark cabinet side for either a left or right side vent hole
location.
2. Mark and cut a 5½" (13.9 cm) diameter hole in the desired
cabinet side.
3. Mark and cut a 14" x 11" (35.6 x 27.9 cm) opening in the floor
of the same cabinet as the vent hole opening.
4. Remove 4 locknuts on the motor side of the blower and
remove the bracket.
5. Lift and rotate the motor 180° to reposition the electrical
connection.
6. Rotate bracket 180° and secure with 4 locknuts.
A.Inlet
B.Vent clamp
C.Floor
D.Vent system
A.31
³⁄₁₆
" (79.2 cm) to top of cabinet
B.18" (45.7 cm) from back wall
A.5½" (13.9 cm) diameter hole
A
B
C
D
A
B
A
Top View
A.11" (27.9 cm) from front of cabinet
B.14" (35.6 cm) from left side of cabinet
View from Motor Side of Blower
A.Electrical connector
A.Electrical connector
A
B
A
A
