21
ROUTER SETUP
advance to the next screen.
IP Address: Enter the address provided by your ISP.
Subnet Mask: Enter the address provided by your ISP.
Gateway IP: This is provided by your ISP.
PPPoE — This connection type (Point-to-Point Protocol over
Ethernet) is typically used with DSL and ADSL service. Click “Next”
to advance to the next screen.
User Name: Enter the PPPoE user name provided by your ISP.
Password: Enter the PPPoE password provided by your ISP.
Retype Password: For conrmation.
Service Name: For reference.
MTU: Enter a value for the largest packet size to be permitted
for network transmission. The default value of 1496 is
recommended.
Maximum Idle Time: Enter a gure within the range in order to
cut your connection with your ISP after that period of time.
BigPond — Select if this service (Australia’s largest ISP) is used.
Click “Next” to advance to the next screen.
BigPond Account: Enter the user name provided by the ISP.
BigPond Password: Enter the password provided by the ISP.
Retype Password: For conrmation.
Authentication Server: This is provided by the ISP.
