Black plate (51,1)
Model "S51-D" EDITED: 2008/ 3/ 26
LRS0453
. Check the booster seat in your vehicle
to be sure it is compatible with the
vehicle’s seat and seat belt system.
. Make sure the child’s head will be
properly supported by the booster seat
or vehicle seat.The seatback must be at
or above the center of the child’s ears.
For example, if a low back booster seat
*
1
is chosen, the vehicle seatback
must be at or above the center of the
child’s ears. If the seatback is lower
than the center of the child’s ears, a
high back booster seat
*
2
should be
used.
LRS0464
. If the booster seat is compatible with
your vehicle, place your child in the
booster seat and check the various
adjustments to be sure the booster
seat is compatible with your child.
Always follow all recommended proce-
dures.
All U.S. states and Canadian provinces or
territories require that infants and small
children be restrained in an approved child
restraint at all times while the vehicle is
being operated.
The instructions in this section apply to
booster seat installation in the rear seats
or the front passenger seat.
BOOSTER SEAT INSTALLATIO N
WARNING
INFINITI recommends that booster seats be
installed in the rear seat. However, if you
must install a booster seat in the front
passenger seat, move the passenger’s seat
to the rearmost position.
CAUTION
Do not use the lap/shoulder belt Automatic
Locking Retractor (ALR) mode when using a
booster seat with the seat belts.
Follow these steps to install a booster seat
in the rear seat or in the front passenger
seat:
Safety — Seats, seat belts and supplemental restraint system 1-35
