18
2
r PLOTTER MODEq COASTLINE DATA MANIPULATION
(2)-2 Ship-centering mode
| Manual operation (when the
cross hair cursor is active)
(2)-3 Displaying the latitude
and longitude lines
In ship-centering mode, the coastline image is automatically adjusted so that
the ship is always at the center of the screen.
The system defaults to the ship-centering mode.
If the ship mark is missing from the screen on which the cross hair cursor is active,
pressing the [SHIP] key allows the system to go to the ship-centering mode, where
the cross hair cursor disappears and the ship mark is centered on the screen.
A ROM card contains coastline data consisting of at least two screens. If a ROM
card (a NAVIONICS
®
Electronic Chart) is not inserted into the card slot, no coast-
line data is displayed.
The loxodromic latitude and longitude lines can be displayed on the coast-
line screen.
The color of these lines can be selected from seven options.
q Press the [MENU] key.
The Main Menu screen will appear.
w Select “Screen Setting” using the [UP] or [DOWN] key and press the [SET] key.
The Screen Setting screen will appear.
e Select “GRID” using the [UP] or [DOWN] key and press the [SET] key.
The selected menu item turns blue.
t Move to the color field using the [LEFT] key.
The color field is highlighted in yellow.
y Select the desired color from among available colors (White (WHIT), Yellow
(YELL), Light blue (LBLU), Purple (PURP), Red, Green (GREE), Blue) and
press the [SET] key.
The color of the latitude/longitude lines changes to the selected option.
* If you do not want to display the latitude/longitude lines on the screen, select
“OFF” and press the [SET] key.
u When you finish setting, press the [MENU] key.
The previous screen appears.
