Appendix G High Availability
538 September 2002 HPSS Installation Guide
Release 4.5, Revision 2
• Cluster Event Worksheet
However, this is a large list of worksheets to go through, so they have been condensed down to
cover only what is needed for an HA HPSS system. The following pages contain the condensed HA
HPSS Planning Worksheet with suggested values. Please refer to the HACMP for AIX Planning
Guide, Appendix A for help in filling in the blanks below. A sample completed worksheet is given in
Section G.2.2.2: HA HPSS Planning Worksheet (example) on page 541.
The name chosen for the service adapter must be the same as the host name given to
each node. For instance, the example worksheet lists hasvc as the service adapter’s
name. In that case, the host name (as given by the hostname command) for each node
also needs to be hasvc. This is necessary for DCE and HPSS to properly function
during a failover.
G.2.2.1 HA HPSS Planning Worksheet
Cluster ID _1________
Cluster Name _HAHPSS_
Network:
Name _ether1____
Type _Ethernet__
Attr _public___
Netmask __________
Node names _hanode1_, _hanode2_
Boot and Standby Adapters (hanode1):
IP Label __________ __________
Function _boot_____ _standby__
IP Address __________ __________
Network Name _ether1___ _ether1___
Network Attr __________ __________
Boot and Standby Adapters (hanode2):
IP Label __________ __________
Function _boot_____ _standby__
IP Address __________ __________
