36
Maintenance
1. First change after 25 hours. When operating with a heavy load or at high ambient temperatures,
replace the engine oil every 125 hours.
Check the condition of the battery,
clean if necessary
42 ●
Check the oil level in the bevel gear,
top up if necessary
112 ●
Check the wheel nuts - ❍
Check the parking brake, adjust if
necessary
5
39 ●
Check the safety function 43 ●
Check/adjust the cutting unit settings.
(tilt angle)
5
47 ●
Replace the air filter and clean the
cyclone filter
40 ●
Replace the belts (power take-off belt
and cutting unit belt)
Adjust the power take-off belts
5
- ●
Check the condition of the hydraulic
hoses
5
- ❍
Replace fuel filter and check hoses
4
- ❍
Adjust the valves and check the
engine speed
4
- ❍
Replace the pump and generator belt 39 ●
Change the hydraulic oil and filter
4
- ❍
Change the oil in the bevel gear 112 ●
Change the coolant
4
50 ●
Check all hoses with connections to
the engine and the engine’s
mountings
5
- ❍
Replace the diaphragm for the closed
crankcase ventilation
4
- ❍
Check cables and terminals in the
electrical system
4
- ❍
Check generator and starter motor
4
- ❍
Pressure test the fuel injection
nozzles
4
- ❍
Check the coolant pump
4
- ❍
● =
Described in this manual
❍ = Not described in this manual.
Maintenance Page Daily main-
tenance
Weekly
main-
tenance
Maintenance interval hours
befor after
500 1000 2000 3000250
