www.HunterFan.com
1.888.830.1326
Troubleshooting
Lights dim when turned on or
do not turn on at all.
• Make sure the wattage of the
light bulbs installed matches
the specications on the light
sockets.
Fan doesn’t work
• Make sure power switch is on.
• Push the motor reversing switch
rmly left or right to ensure that
it is engaged.
• Check the circuit breaker to
ensure the power is turned on.
• Make sure the blades spin freely.
• Turn off power from the circuit
breaker, then loosen the canopy
and check all the connections
according to the wiring diagram
on page 8.
• Check the plug connection in
the switch housing.
Excessive wobbling
• Make sure the blades are
securely attached to the
blade irons according to the
blade assembly instructions
provided.
• Use the provided balancing
kit and instructions to
balance the fan.
Noisy operation
• Check to see if any of the blades
are cracked. If so, replace all of
the blades.
18
M3559-01 • 11/12/14 • © Hunter Fan Company
