20
Installation and Connection
Ceiling Installation
Use the included ceiling mount
xtures (camera side and ceiling
side), along with the safety wire and
screws when mounting the camera
on the ceiling.
Warning
To mount the camera in a high
place, such as on the ceiling,
have an installer specialized in
such construction do the work.
When mounting the camera
in a high place, make sure the
location it will be mounted and
the materials used for mounting
it (other than the included
xture, etc.) are strong enough
to support a weight of at least
20kg and then mount the
camera securely. If materials
are not strong enough, it may
fall and cause an injury.
To prevent it from falling, be
sure to attach the safety wire.
Take all due care to prevent
the camera from falling during
installation.
If installed in a high place,
inspect once a year to make
sure the mount has not become
loose. Make more frequent
inspections if the conditions of
use call for it.
1 Mount the camera to the ceiling
mount xture (camera side) with
the included screws (M3 × 8).
Four screws included
(M3 × 8)
Ceilluig mount fixture
(Camera side)
2 Be sure to attach the safety wire
of the camera with the included
screw (M5 × 12).
Install the mounting hardware as
indicated by the mark.
Mark
Safety wire
Included screw (M5 ×12)
