79
On-Screen Display
Setup
8. Use the CURSOR PAD ̇ or ̈ to choose the
brand name of your DVD.
9. Press the CURSOR PAD ̄ to highlight the IR
CODE Set, then use the CURSOR PAD ̇ or ̈
to choose the preset IR Code.
10. Use the CURSOR PAD ̄ to highlight the “
POWER ” Test button.
These On-screen buttons are called “ Soft
Keys ”.
11. Press the SELECT button to pass the Power
command through the IR Mouse and onto the
DVD.
( Repeat steps 9 to 11 until finding the IR code
that will power up the A/V Receiver. If the DVD
turns ON, then you have found the correct
preset IR code ).
12. Use the CURSOR PAD ̇, ̈, ̆ and ̄ to
highlight NEXT, then press the SELECT button
to move on to the next SETUP screen.
13. Use the CURSOR PAD ̇ or ̈ to select the TV
Input that connects to the video and audio
output of the DVD.
14. Use the CURSOR PAD ̇, ̈, ̆ and ̄ to
highlight NEXT, then press the SELECT button
to move on to the next SETUP screen.
15. Confirm all settings, then press the SELECT
button to move on to the next SETUP screen.
16. Press the SELECT button to select YES to
Setup another device. Press the CURSOR
PAD ̇ or ̈ to highlight “ No thanks, I'm done
“, then press the SELECT button to exit the
A/V NET SETUP.
Learning Mode
This function of the AV NET allows the user to use
equipment that is not supported by the AV/NET codes.
After programming your equipment to the AV NET and
the Soft Keys do not work, you can manually “LEARN”
each one by completing the Learning Mode. The
Learning Mode will transfer any remote control button
IR code of your equipment to the “Soft Keys” of your
AV NET.
Learning Mode (Example: A/V Receiver
Setup)
1. Press the SELECT button to start the SETUP
WIZARD.
2. Use the CURSOR PAD ̆ or ̄ to highlight
YES.
3. Press the SELECT button to select.
4. Use the CURSOR PAD ̇, ̈, ̆ and ̄ to
highlight NEXT, then press the SELECT button
to move on to the next SETUP screen.
