Chan. Manager
Sel.
This function controls the low frequency audio to all speakers.
Press CURSOR PAD ̆ or ̄ to select menu item.
Press CURSOR PAD ̇ or ̈ to adjust the function.
Press EXIT to quit the MENU, or select Audio to return to the main menu.
NOTE: If TREBLE is selected you are adjusting treble. The additional menu items Bass and Balance can be selected and
adjusted in the same manner.
This function controls the high frequency audio to all speakers.
This function will control the left to right balance of the LCD TV internal speakers.
Bass
Balance
Dynamic Bass
Treble
Multi-Channel Television Sound will allow you to select STEREO (a stereo broadcast), MONO (monaural
sound) used when receiving a weak stereo broadcast or 2nd Audio Prog (SAP) which may be a secondary
language, weather report, etc. The sources received will be displayed at the top right edge of the TV. The
source you select will be displayed above the sources received. See example below for each selection
when both stereo and second audio are received (monaural is always received).
This function is useful when setting up the external speakers. If you prefer to use only speakers from a
separate stereo system, turn this feature OFF. When set to OFF, the LCD TV speakers and the sub-woofer
output are OFF. Also, set to OFF, if you prefer to use only your head-phones.
This function eliminates the noise between stations. If a channel is tuned and is noisy, this function will
automatically eliminate the audio for that channel.
This function will automatically adjust volume so each channel and input has the same average volume
level.
STEREO SELECTED
SAP SELECTED
MONO SELECTED
3:32 PM
Ant A 10
Stereo
R
3:32 PM
Ant A 10
SAP
R
3:32 PM
Ant A 10
Mono
R
Matrix Surround
Audio Source
Internal Speakers
Auto Noise Cancel
Perfect Volume
