USING THE M208’S COMMAND SET: npsh Command Set 107
set com1 4800 cs7 cstopb parodd
sets COM1 to 4800 bps (bits per second), 7 data bits, 2 stop bits, and odd
parity.
See also: list com1|com2 on page 98.
set date
set date
year month day
Set the current date. year is four digits, month is from 1 to 12, and day is the
number in the month.
See also: list date on page 98.
set dest
set dest
destname
alternate
alternatedestname
Set up an alternate destination for the print job if that particular destname’s
printer is busy, in error mode, or off-line. alternatedestname is the alternate
destination to send to.
See also: Making An Alternate Print Destination on page 133.
set dest
destname
backchannel [com1|com2]
Establish a return path for printer feedback when printing to a non-bidirec-
tional parallel port. backchannel can be a serial I/O port.
set dest
destname
ioport prn|com1|com2
Associate a destination with an I/O port so that jobs sent to that destination
appear on the specified port.
set dest
destname
logpath
logpathname
Associate a logpath with a destination. Please see set logpath on page 108 to
configure this logpathname.
set dest
destname
model
modelname
Associate a model with a destination. Jobs sent to the named destination are
Examp
e
