6-12 Recover Missing Ink Jets
9. If the Prime Bars show any missing jets, dab only the print-
heads that have missing jets with a lint-free cloth moistened
with HP Scitex MF50 Flushing Solution:
• Gently dab the printhead with a blotting motion. Do not
wipe the printheads.
• Close the cabinet door or wheel the cabinet back into
position.
10. Select Tools > Maintenance > Print Recover Jets Pattern
from the menu for those printheads with missing jets (or
select all printheads).
After printing this pattern, the prime bars are printed again.
• If all jets (indicated by a printed line) are working, the
printer is ready to print.
• If there are any missing jets, repeat steps 2 through 10
two or three times until all jets are working.
11. From the Front Page screen, press the Prime Bars key.
• If all jets (indicated by a printed line) are working, the
printer is ready to print.
• If the Prime Bars still show missing jets, map them out
(see “Manual Jet Mapping” on page 4-16, or “AutoJet” on
page 4-3) or contact technical support for further instruc-
tions.
12. Close the cabinet door or replace the cabinet into the oper-
ating position.
