10
OPERATION
Move the Master Power switch (marked
“Power” ¡) to the “
•
” (On) position to
use the subwoofer.The HKTS 2 subwoofer
will automatically turn itself on or go into
standby (sleep) mode when left in the
standby mode (“Auto/On” switch ™ in the
“Auto” position).When your receiver or
amplifier is off, or is not sending program
material to the subwoofer, the subwoofer
will be in standby mode and the LED will
turn red.When the sub
woofer senses an
audio signal,
it will automatically turn itself
on and the LED will turn green. If the
subwoofer does not sense a signal after
approximately twenty minutes,
it will
automatically go into standby mode.
When the “Auto/On” switch ™ is switched
to the “On” position, the subwoofer will
remain on, whether or not program material
is playing.
If you will be away from home for an
extended period of time, or if the sub-
woofer will not be used, switch the Master
Power switch ¡ to the “Off” position.
