ENGLISH
21
Connecting a television using cinch cables (pro-
gressive scan)
Caution:
This connection transmits video signals at a high frequency
range. Before you first switch on the device, please check
whether your television or projector is suitable for this use.
GRUNDIG accepts no liability for damage resulting from
negligent use.
Notes:
The video output must be set to »YUV« under »SETUP« –
>
»PREFERENCES« –
>
»Video Output«.
You can use the »I/P« button to select whether the video signal
is provided in progressive mode or interlace mode.
Depending on the model of television or projector, you have to
activate the relevant input sockets on the device.
1 Plug a standard cinch cable in the »Y«, »Pb/Cb« and
»Pr/Cr« sockets of the HDD DVD recorders and in the corre-
sponding socket (e.g. VIDEO IN or COMPONENT Y P
B
/C
B
P
R
/C
R
) on the television or projector.
2 Plug standard cinch cables into the »L AUDIO OUT R« sockets
on the HDD DVD recorder and in the corresponding sockets
(AUDIO IN) on the television or projector.
CONNECTION AND PREPARATION _____
