A SERVICE OF

logo

- 68 -N400 Pro2 / N400 Series Motherboard
English
CMOS Setup Utility-Copyright (C) 1984-2003 Award Software
` Standard CMOS Features
` Advanced BIOS Features
` Advanced Chipset Features
` Integrated Peripherals
` Power Management Setup
` PnP/PCI Configurations
` PC Health Status
` Frequency/Voltage Control
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
ESC: Quit KLJI: Select Item
F8: Dual BIOS / Q-Flash F10: Save & Exit Setup
A. What is Dual BIOS Technology?
Dual BIOS means that there are two system BIOS (ROM) on the motherboard, one is the
Main BIOS and the other is Backup BIOS. Under the normal circumstances, the system works on
the Main BIOS. If the Main BIOS is corrupted or damaged, the Backup BIOS can take over while
the system is powered on. This means that your PC will still be able to run stably as if nothing has
happened in your BIOS.
B. How to use Dual BIOS and Q-Flash Utility?
1.) After power on the computer, pressing <Del> immediately during POST (Power On Self Test) it
will allow you to enter Award BIOS CMOS SETUP, then press <F8> to enter Flash utility.
Flash BIOS Method Introduction
Method 1 : Dual BIOS
(1)
/ Q-Flash
Enter Dual BIOS / Q-Flash Utility (Y/N)? Y
1 For GA-7N400 Pro2 only. 2 For GA-7N400 only. 3 For GA-7N400-L only.