Fresh Food Freezer Panel Freezer Panel
Panels With Dispenser Without Dispenser Weight Limits*
G-67-9/32" C-17-7/8" E-33-5/8" A-67-9/32" Fresh Food = 38 lbs.
23 cu. ft. H-19-15/32" D-14-15/32" F-14-15/32" B-14-15/32" Freezer = 28 lbs.
Panels up to 1/4" thick will fit door frame with no special preparation. *Total weight of panels
Add filler behind material thinner than 1/4" for proper fit. (i.e., both freezer panels)
Note: Panels up to 3/4" will require special routing area around handles.
Dimensions may vary depending on depth of panel.
(Fresh Food panel shown)
Notch required at top
corner as noted.
Door Panel Dimensions
Order your own custom wood panels to match cabinetry or other decor.
All other dotted lines indicate
areas that must be routed out
about 5/32" (4 mm) on the back
side of panels 1/4" (6 mm) thick
or more. For panels less than
1/4" (6 mm) thick, these areas
can be cut out of the filler panel.
Specification Created 11/01
Total volume and shelf
area are calculated by the
Association of Home
Appliance Manufacturers’
standards.
Listed by
Underwriters
Laboratories
For answers to your Monogram,
®
GE Profile
™
or
GE appliance questions, visit our website at
GEAppliances.com or call
GE Answer Center
®
service, 800.626.2000.
IMPORTANT: Before finalizing specifications for your GE Profile
CustomStyle Refrigerator, please NOTE:
• A minimum of 36-1/8" is required for refrigerator installation with collar
• Be sure to allow for 1/2" or 3/4" side panels in addition to the 36-1/8" minimum
