For answers to your Monogram,
®
GE Profile
™
or
GE
®
appliance questions, visit our website at
ge.com or call GE Answer Center
®
service,
800.626.2000.
Dimensions and Installation Information (in inches)
Specification Revised 6/07
210831
PFIC1NFW
GE Profile
™
Counter-Depth 20.9 Cu. Ft. Bottom-Freezer Drawer Refrigerator
Listed by
Underwriters
Laboratories
• All wall/floor molding should be removed prior
to installation.
• Water recess on rear wall recommended to prevent
water line damage. 48" minimum length, 1/4"-diameter
water line tubing recommended.
• When possible, recess both copper/pex water line and
electrical outlet (see local codes).
• Front and rear leveling legs are adjustable for the built-in
look (see owner’s manual).
• If optional collar trim kit is to be used or anticipated, see
collar trim installation on next page for different rough-
in dimensions.
Installation tips to maximize the built-in look
8' Ceiling
13" to 14"
Cabinet
12"
Soffit
36-1/8"
24-1/2"
*The rough-in dimensions of 70-1/4"/72-1/4" are minimum and measured from
the finished floor to top of opening (or the underside of the overhead cabinets).
For models with trim kit: If frameless style cabinets are planned for above the
refrigerator, you may need to consider adding a maximum of 1/4" (70-1/2") to
height of opening for 21 cu. ft. models to allow additional clearance between
cabinet doors and top of refrigerator trim when cabinet doors are in open position.
Collar Trim In. w/ceiling
70-1/4"*
21 cu. ft. models
25"
Counter
Top
ElectricalWater
3/4" Airspace
(1/2" Gap + 1/4"
Wall Plates)
24"
Cabinet
25"
Counter
Top
Electrical Water
3/4" Airspace
(1/2" Gap + 1/4"
Wall Plates)
24"
Cabinet
25"
Counter
Top
ElectricalWater
Trim
3/4" Airspace
(1/2" Gap + 1/4"
Wall Plates)
24"
Cabinet
25"
Counter
Top
Electrical Water
Trim
3/4" Airspace
(1/2" Gap + 1/4"
Wall Plates)
24"
Cabinet
FOR 21 CUBIC FOOT MODELS
FOR 24 CUBIC FOOT MODELS
Fig 2A eps
Rough-in dimensions
Standard, new construction and replacement installation
*The rough-in dimensions of 70-1/4"/72-1/4" are minimum and measured from the finished floor to top of opening (or
the underside of the overhead cabinets). For models with trim kit: If frameless style cabinets are planned for above the
refrigerator, you may need to consider adding a maximum of 1/4" (70-1/2") to height of opening for 21 cu. ft. models to
allow additional clearance between cabinet doors and top of refrigerator trim when cabinet doors are in open position.
