PART
QUANTITY
Upper Cabinet 1
Template
Rear Wall 1
Template
(3 pieces
mounting
plate only)
Installation 1
Instructions
Exhaust 1
Adapter
Damper 1
Power Cord 1
Clamp Bushing
(for the cord
hole in a metal
upper cabinet)
PART QUANTITY
Lag Screws (
1
⁄4" x 2") 4
(for wall stud holes)
Toggle Bolts (
1
⁄4" x 3") 4
(for drywall holes)
Spring Toggle Heads 4
(for toggle bolts)
Bolts 2
(for securing to
the upper cabinet)
Tapping Screws (
1
⁄8"x
1
⁄2") 1 black
(for attaching the 2 bronze
damper duct connector)
Power Cord Clamp and 1
Dark-Colored Mounting
Screw (to hold
the power cord)
6
• If the unit is damaged in shipment, return the unit
to the store in which it was bought for repair or
replacement.
• If the unit is damaged by the customer, repair or
replacement is the responsibility of the customer.
• If the unit is damaged by the installer (if other than
the customer), repair or replacement must be made
by arrangement between customer and installer.
DAMAGE – SHIPMENT/
INSTALLATION
PARTS INCLUDED
ADDITIONAL PARTS
Installation Instructions
PARTS INCLUDED
You will find the installation hardware contained
in a packet with the unit. Check to make sure you
have all these parts.
NOTE: Some extra parts are included.
NOTE: You need to install at least two lag screws
into a 2" x 4" stud and four anchor bolts into the wall.
Also, the mounting area must meet the 150 lbs. weight
requirement.
HARDWARE PACKET
