Controls
Infinite Heat Controls
Sensi-Temp
TM
Control
z
1
{0
I
3
@
/
k.
~o
aw 4
—.-
\
*,
5
7
/
6
Guide for Using Heats
HI (7)—Bring water to boil.
This control allows you to pre-
select the heat setting. To turn the
MEDIUM HI (5-6)—Fast fry, pan
element ON, push in and turn the
broil; maintain fast boil on large
knob counterclockwise. You will
feel a “click” at the OFF position.
amount of food.
MED (4)—Saute and brown;
maintain slow boil on large amount
of food.
MEDIUM LO (2-3)—Cook after
starting at HI; cook with little
water in covered pan.
LO (l)---Steam rice,
cereal; maintain
servimz
temperature of most foods.
“,
NOTE:
1. At HI (7) or MEDIUM HI (5-6),
never leave food unattended.
Boilovers
cause smoking; greasy
spillovers
may catch fire.
2. At LO (1) or MEDIUM LO
(2-3), melt chocolate, butter on
small element.
The automatic element senses the
temperature of the pan and
regulates it according to the setting
selected.
When turned on, the Sensi-Temp
element always begins with full
power, no matter where the knob
is set. When the temperature
corresponding to that setting has
been reached; the element cycles
OFF and ON to maintain the
selected setting. Even when the
dial is set at minimum, the element
begins on full power until the
selected heat setting is reached.
The Sensi-Temp element will not
burn food when the correct setting
is selected. Food may dehydrate if
left on but the heat sensing device
will not let the food or
uan
How to Set the Controls
–
Step 1: Push control knob down.
Step 2: Turn the knob to desired
heat setting.
Control must be pushed in to set
only from OFF position. When
control is in any position other
than OFF, it maybe rotated
without pushing in.
Be sure you turn the control knob
to OFF when you finish cooking.
An indicator light will glow when
overheat beyond the
se~ting.
a surface unit is on
Cooktop temperatures increase
with the number of elements that
are on. With 3 or 4 elements
turned on, surface temperatures
are high, so be careful when
touching the cooktop.
—
6
