![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/2/fc/2fc254b5-893e-4fd8-8a58-fd5e882d8776/2fc254b5-893e-4fd8-8a58-fd5e882d8776-bg7.png)
The TIME COOK feature allows
you to preset the cooking time.
The oven shuts off automatically.
Power Level 10is automatically set
for time cooking, but you may
change this for more flexibility.
See your Cookbook.
To become better acquainted with
TIME COOK function, make a cup
of coffee by following the steps
below.
Step 1: Fill a cup 2/3 full of water
and add 1teaspoon of freeze dried
coffee. Use a cup that has no metal
decoration. Place cup in oven and
close door.
Step 2: Touch TIME COOK. The
display shows
:0, Signal light
above TIME COOK flashes. Power
Level 10 is automatically set, but
does not appear on display.
Step 3: Select your time. Touch
1, 2 and Ofor a minute and 20 sec-
onds. 1:20 and signal light above
TIME COOK appear on display. If
another Power Level is desired
touch POWER LEVEL and the
number, although Power Level 10
(HIGH) is preferred for this cup of
coffee.
Step 4: Touch START. Time
counting down shows on display.
Step 5: When time is up, oven
sounds and oven, light, and fan
shut off.
arid
Q. I set my oven for the time called
for in the recipe but at the end of
the time allowed, my dish wasn’t
done. What happened?
A. Since house power varies due
to time or location, many Time
Cook recipes give you a time range
to prevent overcooking. Set the
oven for minimum time, test the
food for doneness, and cook your
dish a little longer, if necessary.
Q. I want to cook my dish on a
Power Level other than HIGH, what
do I need to do?
A. To change the Power Level,
touch the POWER LEVEL pad after
entering desired cooking time.
Enter the desired number and then
touch START.
Q. Can I interrupt my Time Cook
function to check the food?
A. Yes. To resume cooking, simply
close the door and touch START.
NOTE: Microwave power will not
come on until you are ready. You
must touch START for cooking to
begin.
Q. i touched the number pads and
selected my power level. When I
touched START, however, my oven
didn’t come on. Why not?
A. The TIME COOK pad must be
touched before setting the number
pads or else your oven will not be-
gin cooking.
Q. I tried to change Power Level
but the display changed back to
cooking time. Why?
A. After touching Power Level pad
you only have 4 seconds to enter
the number. Try
setting controls
again.
7