Preparing for Vacation
For long vacations or absences, remove
food and unplug the refrigerator. Move
the control to the
MIN
position, and clean
the interior with a baking soda solution
of one tablespoon (15 ml) of baking soda
to one quart (1 liter) of water. Leave the
doors open.
Preparing to Move
Secure all loose items such as shelves and
drawers by taping them securely in place
to prevent damage.
Be sure the refrigerator stays in an upright position
during moving.
Consumer SupportTroubleshooting TipsOperating Instructions
Safety Instructions
Installation Instructions
7
ge.com
Replacing the Light Bulb
Moving the control to MIN does not remove power
to the light circuit.
The bulb is located behind the shield
in the back wall.
Unplug the refrigerator.
Remove shelves.
Remove the screw.
Gently remove the light shield by
inserting a flat blade screwdriver
into the slot at the top of the shield
and pop it off.
Replace the bulb with an appliance
bulb of the same or lower wattage
(15 Watt maximum.)
Insert the tab at the bottom of
the light shield into the light bulb
housing and snap it into place.
Replace the screw.
