E
2E
o
020
31
-- 2 2 --bm17s11a
C = component designation in the circuit diagram
Item Qty Ordering no. Denomination Notes C
-- -- 0455 890 881 Feed unit Complete, contains items 301 -- 332
300 1 0469 833 880 Pressure arm (W) Complete, contains items 301 -- 305
301 1 0455 053 880 Geared adapter (W)
302 1 0369 728 001 Pressure roller (W)
0466 262 001 Pressure roller (W) (A) Knurled
303 1 Locking washer SGA D8
304 1 Holder
305 1 Shaft
306 1 0455 896 001 Spring
308 1 0455 597 001 Drive unit With tachometer M01, G01
309 1 0215 701 007 Locking washer Included in item 308
310 1 0191 496 1 14 Key Included in item 308
311 1 0466 074 001 Inlet nozzle (W)
312 1 0367 528 001 Pin bolt
313 1 0368 749 880 Pressure transducer
314 2 0368 750 001 Insulating sleeve
315a 1 0455 894 001 Insert tube (W) (A) For Al wire, must be used together with item
316a
315b 1 0455 889 001 Insert tube (W) Steel, must be used together with item 316b
Delivered from machine no. XXX 647 XXX
316a 1 0455 885 001 Outlet nozzle (W) (A) Must be used together with item 315a
316b 1 0455 886 001 Outlet nozzle (W) Must be used together with item 315b
Delivered from machine no. XXX 647 XXX
317 1 0455 882 001 Current sleeve
318 1 0455 883 001 Spacer sleeve ⊘ 16/8.2x0.9
319 1 Washer ⊘ 16/8.4x1.5
320 1 Screw M8x20
321 1 0455 881 001 Protection plate
322 1 0215 201 202 O--ring
323 1 0455 898 001 Screw (M5x12)
324 1 Screw M4x12
325 2 Screw M3x16
326 1 0193 104 002 Washer
327 1 0369 557 001 Feed roller (W) (A) (V)For ⊘ 0.6 -- 0.8 mm Fe, Ss and cored wire
1 0369 557 002 Feed roller (W) (A) (V)For ⊘ 0.8 -- 1.0 mm Fe, Ss and cored wire
1 0369 557 003 Feed roller (W) (V)For ⊘ 1.0 -- 1.2 mm Fe, Ss and cored wire
1 0369 557 007 Feed roller (W) (A) (V)For ⊘ 1.2 -- 1.6 mm Fe, Ss and cored wire
1 0369 557 010 Feed roller (W) (A) (V)For ⊘ 1.2 mm x 2 Fe, Ss and cored wire
1 0369 557 013 Feed roller (W) (A) (V)For ⊘ 1.4 --1.6 mm Fe, Ss and cored wire
1 0369 557 004 Feed roller (W) (A) (K)(V) For ⊘1.0 -- 1.2 / 1.4 -- 1.6 mm cored wire
1 0369 557 005 Feed roller (W) (A) (K)(V) For ⊘1.4--1.6 / (2.0--2.4) mm cored wire
1 0369 557 006 Feed roller (W) (A) (U) For ⊘ 1.0 -- 1.2 mm Al wire
1 0369 557 008 Feed roller (W) (A) (U) For ⊘ 1.6 mm Al wire
1 0369 557 011 Feed roller (W) (A) (U) For ⊘ 0,8 -- 0,9 mm Al wire
328 1 0369 716 001 Geared adapter (W)
329 1 0455 893 001 Shaft
330 1 0455 884 001 Gear housing
331 3 Screw M6x16
332 1 0332 351 013 Drive shaft with pinion Included in item 308
(W) = wear part (A) = accessory (K) = knurled rollers (V) = V-- groove (U) = U--groove
