List of Functions
71
Settings Menu
Sub Menu Function
Keystone You can correct keystone distortion.
H/V-Keystone: Corrects horizontal and vertical keystone distortion. Select one of V-Keystone or H-Keystone.
Use the [w/], [v/], [</], and [>/ ] buttons on the control panel to perform similar corrections to V-Keystone and
H-Keystone.
Quick Corner: Selects and corrects the four corners of the projected image. s p.40
Control Panel Lock You can use this to restrict operation of the projector's Control panel. s p.62
Lens Operation Lock You can use this to restrict the lens operation of the remote control. s p.63
Pointer Shape You can select the shape of the pointer. s p.52
Pointer 1: Pointer 2: Pointer 3:
Power Consumption You can set the Lamp brightness to one of two settings: Normal or ECO.
Select ECO if the images being projected are too bright such as when projecting images in a dark room or onto a small screen.
When ECO is selected, the amount of electricity consumed and the lamp's operating life are changed as follows, and the fan
rotation noise during projection is reduced. Electrical consumption: about 16% decrease, lamp life: about 1.4 times longer
Remote Receiver You can limit the reception of the operation signal from the Remote Control.
When you want to prohibit operation by Remote Control, or if the Remote Receiver has a fluorescent light too close to it, you can
make settings to deactivate the remote receiver you do not want to use or that is experiencing interference.
