27
Configuration Menu Functions
Configuration
Menu
ÉXÉäÅ[ÉvÉÇÅ[Éh
ì¸óÕâšëúìx
p.34
p.33
The "Info" menu is only used to display the projector status.
"Image" menu
Aspect s page 29
Zoom Caption
s page 29
Tracking
s page 29
Sync.
s page 29
Position
s page 30
Advanced
s page 30
Auto Setup
s page 31 On, Off
Reset s page 31 Yes, No
Keystone s page 31
Operation
s page 31
User’s Logo
s page 32 Yes, No
Display s page 32
Input Signal
s page 33
Projection
s page 33
Language
s page 33
Reset
s page 33 Yes, No
Lamp Hours
"Settings" menu
"Info" menu
• The message text will be displayed in yellow when it
is time to replace the lamp.
• Time from 0H to 10H will be displayed as 0H.
From 10H onwards, the display will be in units of 1H.
Source
Input Signal
Resolution
Refresh Rate
Sync Info
Video Signal
The "Info" menu is only used to display the projector status.
Save Memory *s page 33 Memory1 to Memory9
Load Memory s page 33 Memory1 to Memory9
Reset Memory s page 33 Yes, No
Reset All s page 34 Yes, No
Reset Lamp Hours s page 34 Yes, No
"Reset"
menu
"Memory"
menu
Only displayed for composite video/S-Video input
Only displayed for component video/RGB-Video/Computer input
Only displayed for Computer input
* This is displayed in the line menu.
Auto, Normal, Squeeze, Zoom, Through, Squeeze Through, Wide
Vertical Size
Zoom Position
Epson SuperWhite
On, Off
Progressive Off, Video, Film
Ourput scaling
When component video signals are input: Normal, Larger
When signals from the [HDMI ] port are input: Auto, Normal, Larger
Setup Level 0%, 7.5%
DVI-Video Level Normal, Expanded
Displayed for input sources other than computer
Only displayed for Computer input
(does not appear when signals from the [HDMI] input port are being input)
Direct Power On On, Off
Sleep Mode Off , 5min. ,10min. , 30min.
Trigger Out On, Off
Child Lock On, Off
Operation Lock On, Off
High Altitude Mode On, Off
Menu position Top-left, Top-center, Top-right, Center-left,
Center-right, Center, Bottom-left, Bottom-center, Bottom-right
Navigation Bar On, Off
Menu Color Color 1, Color 2
Message On, Off
Display Background Black, Blue, Logo
Startup Screen On, Off
Video Signal Auto, NTSC , NTSC4.43, PAL ,
M-PAL, N-PAL, PAL60, SECAM
Input A Auto, YCbCr , YPbPr
D4/SCART D4(Auto), D4(YCbCr),
D4(YPbPr), SCART
Front, Front/Ceiling, Rear, Rear/Ceiling
