96
Solving Problems
The message Not Supported is displayed.
■
If you’ve connected a second computer or you’re using
component video, make sure the
BNC
option in the Setting menu
is correct. See page 79.
■
Make sure your computer’s resolution doesn’t exceed UXGA
(1600
×
1200), and the frequency is supported by the projector
(see page 108). If necessary, change your computer’s resolution
setting as described below.
Only part of the computer image is displayed.
■
Press the
Resize
button on the control panel or remote control.
■
Make sure the image
Position
setting is correct on the Video
menu. See page 70 for more information.
■
If you’ve connected a second computer, make sure the
BNC
option in the Setting menu is set to
RGB
. See page 79.
■
If you’re using a Macintosh adapter to connect the cable to your
computer’s video-out port, make sure the DIP switches on the
adapter are set correctly. (See your Macintosh documentation for
instructions.)
■
Make sure your computer’s resolution setting is correct. Ideally, it
should be 1024
×
768 to match the projector’s native resolution.
If this option isn’t available, select one of the other compatible
video formats listed on page 108 by doing the following:
■ Windows:
Right-click the desktop, select
Properties
, click the
Settings
tab, and use the dialog box to select a different resolution.
■ Macintosh:
On the Apple menu, choose
Control Panels
, then click
Monitors and Sound
. Select a different resolution.
■
You also may need to modify existing presentation files if you
created them for a different resolution. See your software
documentation for specific information.
