Fine-tuning the Projector 69
■ Color
Adjusts the color intensity, from black-and-white to full color
(not available for RGB video images).
■ Tint
Adjusts the tint of the image (not available for RGB video
images).
■ Sharpness
Adjusts the sharpness of the image.
Adjusting Computer Images
You can also adjust brightness, contrast, and sharpness when you’re
projecting a computer image. In addition, if you’re projecting an
analog RGB image transmitted through the
Computer or BNC
port(s), you can make several other settings.
1. Press the
Menu button on the remote control, then select the
Video menu.
You see a screen similar to the one below. (The settings will be
different if you’re projecting a digital RGB image transmitted
through the
DVI port.)
■ Position
If the image is slightly cut off on one or more sides, it may not
be centered exactly. Use this setting to center it.
■ Tracking
Adjust this value to eliminate vertical stripes in the image.
note
You can also use the remote
control’s
Auto button to
automatically reset the
projector’s tracking, sync,
resolution, and position
settings. See page 47 for
details.
Video
Audio
Color Mode
Position
Tracking
Sync.
Brightness
Contrast
Sharpness
Select
0000
0
0
0
+
-
+
-
Adjust
[Presentation ]
Resolution
Reset
Execute
[ ]: Enter
[ ]: Select
[Menu]: Exit
Reset All
About
Advanced2
Advanced1
User's Logo
Setting
Effect
Preset
Auto
Manual
Auto
Manual
Set
Adjust
Select
tip
Before adjusting tracking or
sync, fill the screen with an
image containing fine
detail. For example, in
Windows you can select a
pattern to appear as your
desktop background. If this
option isn’t available, try
projecting black text on a
white background.
