18
Taking Photos in Automatic Mode
Automatic photography mode lets you capture high-
resolution images without making complicated settings.
You can use the zoom buttons to move in closer to your
subject and set the flash for indoor or low-light photos.
In automatic mode, images are captured at a resolution
and quality setting of
(2560 × 1920 pixels). To
change these settings, use manual mode (see page 20).
Note:
You can also use the macro and/or self-timer features
in automatic mode. For instructions, see the Reference
Guide on your computer. See page 15 for instructions on
installing the Reference Guide and software.
1 Turn the Mode dial to automatic.
2 Make sure you are at least 20 inches (50 cm) away
from your subject.
Note:
To turn on digital zoom, see the Reference Guide on
your computer.
◗ To zoom in on your subject, press the T
(telephoto) button. To zoom in more, release the
button and press it again.
◗ To zoom out, press the
W (wide-angle)
button. To zoom out more, release the button
and press it again.
