26
Configuration Menu Functions
The configuration menus can be used to make a variety of adjustments and settings involving the screen,
image quality and input signals.
The following two types of menu are available.
Refer to "Using the configuration menus"(s page 34) for details on menu operations.
List of configuration menus
If no image signals are being input, none of the settings can be adjusted except for "Reset" and
"Auto Iris" in the "Picture" menu, or "Auto Setup" in the "Image" menu. The items displayed in the
"Picture" menu, the "Image" menu and the "Info" menu will vary depending on the type of image
signals that are being projected.
■ Full menu
All items in the configuration menu can be checked
while the settings are being made.
■ Line menu
This lets you adjust some areas of the "Picture" menu
and "Memory" menu in the configuration menu.
This menu is useful for viewing the effects of
adjustments in the images being projected while the
adjustments are being made.
QTip: The configuration menus can be used to turn the navigation bar on and off and to change
the colour pattern and display position.
s "Settings" - "Display"- "Menu Position", "Navigation Bar", "Menu Color"
Top menu Sub-menu
Navi
ation Bar
*
*
*
*
*
*
This is displayed in the line menu.
This is displayed in the line menu.
Color Mode s page 28
Input Adjustment
s page 28
Color Saturation
s page 28
Tint
s page 28
Sharpness
s page 28
Color Adjustment
s page 28,29
Auto Iris
s page 29 On, Off
Reset s page 29 Yes, No
"Picture" menu
White Level/Black Level
Brightness/Contras
t
Standard
Advanced
ABS. Color Temp.
Skin Tone
RGB /RGBCMY
Gamma
Dynamic, Living Room, Natural, Theatre,
Theatre Black 1, Theatre Black 2, sRGB
High-band Enhancement, Low-band
Enhancement, H-Sharpness, V-Sharpness
RGB
RGBCMY
2.0, 2.1, 2.2, 2.3, 2.4
Customized
Reset
Displayed for input sources other than computer
* This is displayed in the line menu.
