A SERVICE OF

logo

Open as PDF
next previous
32 - Connecting the projector to a computer
In the case of DVI-D*
Digital signals are output to the projector without amendment if a digital video card for liquid
crystal displays and output port are mounted onto the computer.
· Connect the computer's digital output port to the projector's computer #1 DVI-D port with
the optional digital video cable (ELPKC20/21). Select the cable in accordance with the shape
of the computer port (DVI-D/DFP).
· Set the switch to the digital setting (left-hand side) with the tip of a ballpoint pen or other
pointed object.
Point:
There are cases where the computer must be set up in order to switch the computer output
to the DVI-D. Refer to the instruction manual for the computer for further details.
Computer #1 DVI-D Port
Monitor Port
Digital Video Cable
(optional)