2
Unpacking the Projector
When you unpack the projector, make sure that you have all these components.
If any of the components are missing or incorrect, please contact the supplier.
Projector
(With lens cover attached)
Remote control AAA alkali
batteries
(2 pcs.)
Insert into the remote
control.
Wireless LAN card
(
IEEE 802.11g/b compatible
)
Insert into the card slot of
the projector when
connecting to a computer
via a wireless LAN.
Power cable
(1.8 m (6 ft.))
Use to connect the
projector to an
electrical outlet.
Computer cable
(mini D-Sub 15-pin/
mini D-Sub 15-pin,
1.8 m (6 ft.))
Use when projecting
computer images.
Audio adapter
(3.5 mm dia. Stereo mini plug/
RCA pin jack × 2 red/white, 20
cm (7.9 inches))
Connect this adapter with a
commercially-available RCA
audio cable to output sound of
video equipment from the
projector's built-in speaker.
USB cable
(1.8 m (6 ft.))
Use when connecting to
a computer with a USB
port to use the wireless
mouse function or to
send data to the
projector.
EasyMP Software
(CD-ROM 1 pc.)
Use to install the EasyMP
software into a computer.
Password Protect sticker
When Password Protect is enabled,
attach this to somewhere on the
projector where it is clearly visible to
increase anti-theft effectiveness.
Soft carrying case
(with shoulder strap and handle)
For carrying the projector.
Documentation
Read This First (this booklet)
Safety Instructions/
World-Wide Warranty Terms
Document CD-ROM
Quick Reference Guide
EasyMP Network Setup Guide
ReadThisFirst(EFGIS).book Page 2 Friday, June 25, 2004 7:46 PM
