Setting Up the Projector
11
Additional Components
Depending on how you plan to use the projector, you may need
additional components:
■
To receive an S-Video signal, you need an S-Video cable. (One is
usually provided with your video device.)
■
To receive a component video signal from a VCR or other video
device, you need a BNC cable (usually provided with the device).
■
To take advantage of the projector’s Digital Visual Interface
(DVI), you need a DVI cable and your computer must be capable
of producing video signals in DVI format. (See page 34.) You can
purchase this cable from EPSON, as described on page 4.
■
To connect the projector to a Macintosh PowerBook, you may
need a video-out cable (provided by Apple). If your PowerBook
requires a video-out cable and you do not have one, see your
Macintosh dealer.
