The computer displays copyright information and then performs a
series of power-on diagnostics that check the circuit boards,
memory, ports, keyboard, and disk drives. The computer displays
several messages during the diagnostics, including this prompt:
Hit
<DEL>,
If
you want to run SETUP
If the tests indicate a problem with the system or change in
configuration, you will see an error message followed by this
prompt
RUN SETUP UTILITY
Press <F1> to RESUME
If this happens, press F1 to run the Setup program and check your
system configuration. See Chapter 5 for a complete description of
the Setup program.
When the computer completes its testing, it displays a screen
describing the system’s configuration:
If necessary, press the
Pause button on the keyboard to view the
configuration screen. After viewing the screen, press any key to
continue the startup process.
1-12
Setting Up the Computer
