NOTE: In Autostick mode, the transaxle will only shift
up or down when the driver moves the shift lever to the
Right (+) or Left (-).
AutoStick is deactivated when the shift lever is shifted
from the AutoStick (+/-) position into the DRIVE
position.
General Information
•
You can start out in first or second gear. The system
will ignore attempts to upshift at too low of a vehicle
speed.
•
If a ratio other than 1st is selected, and the vehicle is
brought to a stop, the transaxle control logic will
automatically select the 1st gear ratio.
•
Starting out in second gear is helpful in snowy or icy
conditions.
•
Avoid using speed control when Autostick is en-
gaged.
•
The transaxle will automatically shift up when maxi-
mum engine speed is reached while Autostick is
engaged.
•
Transaxle shifting will be more noticeable when
Autostick is engaged.
•
If a downshift would cause the engine to over-speed,
that shift will not occur until it is safe for the engine.
Mostly the transaxle will stay in the manually selected
ratio, however.
•
If the system detects powertrain overheating, the
transaxle will revert to the automatic shift mode and
remain in that mode until the powertrain cools off.
•
If the system detects a problem, it will disable the
AutoStick mode and the transaxle will return to the
automatic mode until the problem is corrected.
STARTING AND OPERATING 277
5
