Dell
PowerEdge R510 Technical Guide 55
Table 22. Riser 2 Slot Information
For dedicated storage controller
• One x16 PCIe Gen2 slot(slot 1, x16 connector with x16 routing) for full-height full-length cards, and
connected to the IOH
• One x4 PCIe Gen2 slot(slot 2, x8 connector with x4 routing) for dedicated storage controller card, and
connected to the IOH
• System supports 25W maximum power for the slot 1 and 15W for slot 2
• The lower power support on slot 2 is due to system thermal limitations instead of system power
requirements
• The PowerEdge R510 does not support hot-swapping of PCIe cards
10.2.1 PCI Device information
• IOH port 1, 2 (PCI Express Gen2 x4) – Broadcom BCM5716 Gigabit LOM
• IOH port 3 (PCI Express Gen2 x4) – Slot 2
• IOH port 7/8/9/10 (PCI Express Gen2 x16) – Slot 1
10.2.2 Boot Order for Riser 2
Boot order for Riser 2 is as follows:
IOH port 1, 2 (PCI Express Gen2 x4) – Broadcom BCM5716 Gigabit LOM
IOH port 3 (PCI Express Gen2 x4) – Slot 2
IOH port 7/8/9/10 (PCI Express Gen2 x16) – Slot 1
10.2.3 PCI Card Dimensions
Table 23. PCI Card Dimensions: Riser 2
Offered through Customer Kit only.
For dedicated storage controller
