A SERVICE OF

logo

4. Lift the Bluetooth module from its compartment.
5. Grasp the card and gently pull it apart from the connector cable.
Replacing the Bluetooth Module
1. Follow the instructions in Preparing to Work Inside the Computer.
2. Follow the instructions in Removing the Bluetooth Module, as applicable.
3. Connect the new Bluetooth module to the connector cable.
4. Place the Bluetooth module in its compartment.
1
Bluetooth module
2
M2 x 3-mm screw
NOTE: Do not disconnect the Bluetooth connector cable from the system board.
1
Bluetooth module
2
Bluetooth module connector
3
Bluetooth connector cable
CAUTION: Before you perform any of the procedures in this section, follow the safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the
back panel) on the computer.