A SERVICE OF

logo

Open as PDF
next previous
Installing the Memory Module
1. Insert the memory module into the memory socket.
2. Press the memory module down until it clicks into place.
3. Install:
a. bottom cover
b. battery
4. Follow the procedures in After Working Inside Your computer.
Removing the MEMS Board
MEMS board is also known as the sensor board.
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove:
a. battery
b. bottom cover
3. To remove the MEMS board:
a. Disconnect the cable connected to the MEMS board [1,2].
b. Remove the screws that secure the MEMS board to the computer chassis [3].
c. Lift the MEMS board from the computer chassis [4].
14