2-13
Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence System
OL-21851-01
Chapter 2 Configuring the CiscoUnified IP Phone for MIDlets
Configuring the Cisco Unified IP Phone
Load Server — Leave field blank.
Recording Tone Yes Disabled.
Recording Tone Local Volume Yes Leave default setting.
Recording Tone Remote Volume Yes Leave default setting.
Recording Tone Duration — Leave field blank.
Display On When Incoming Call Yes Disabled.
RTCP Yes Disabled.
“more” Softkey Timer — Leave default setting.
Auto Call Select Yes Enabled.
Log Server — Leave field blank.
Advertise G.722 Codec Yes Use System Default.
Wideband Headset UI Control Yes Enabled.
Wideband Headset Yes Enabled.
Peer Firmware Sharing Yes Disabled.
Cisco Discovery Protocol (CDP):
Switch Port
Yes Enabled.
Cisco Discovery Protocol (CDP):
PC Port
Yes Enabled.
Link Layer Discovery Protocol -
Media Endpoint Discover
(LLDP-MED): Switch Port
Yes Enabled.
Link Layer Discovery Protocol
(LLDP): PC Port
Yes Enabled.
LLDP Asset ID — Leave field blank.
LLDP Power Priority Yes Leave the default setting.
Wireless Headset Hookswitch
Control
Yes Disabled.
IPv6 Load Server — Leave blank.
IPv6 Log Server — Leave blank.
802.1x Authentication — User Controlled.
Detect Unified CM Connection
Failure
Yes Leave the default setting (Normal).
Minimum Ring Volume Yes 0-Silent.
Additional drop-down menu choices:
• 2 through 15.
HTTPS Server Yes HTTP and HTTPS Enabled.
Handset/Headset Monitor — Disabled.
Enbloc Dialing — Enabled.
Table 2-10 Product Specific Configuration Layout Fields
Field Required? Setting
